Pengaruh Praktek Kerja Industri (PRAKERIN) Terhadap Hasil Uji Kompetensi Keahlian (UKK) Pada Siswa SMK Negeri 3 Bungo

Authors

  • Wahyu Rasid Annafi Departemen Teknik Otomotif, Fakultas Teknik, Universitas Negeri Padang
  • Toto Sugiarto Departemen Teknik Otomotif, Fakultas Teknik, Universitas Negeri Padang
  • Ahmad Arif Departemen Teknik Otomotif, Fakultas Teknik, Universitas Negeri Padang
  • Hendra Dani Saputra Departemen Teknik Otomotif, Fakultas Teknik, Universitas Negeri Padang

DOI:

https://doi.org/10.24036/jtpvi.v3i1.266

Keywords:

Praktek Kerja Industri (PRAKERIN), Uji Kompetensi Keahlian (UKK), Siswa

Abstract

Peningkatan keterampilan teknis siswa SMK menjadi fokus utama dalam pendidikan vokasi untuk menjawab kebutuhan dunia industri. Salah satu upaya mencetak tenaga kerja yang kompeten di SMK dilakukan dengan Praktek Kerja Industri (PRAKERIN) dan Uji Kompetensi Keahlian (UKK). Penelitian ini bertujuan untuk mengetahui pengaruh nilai PRAKERIN terhadap hasil UKK siswa kelas XII Teknik Sepeda Motor di SMK Negeri 3 Bungo. Metode penelitian yang digunakan adalah kuantitatif korelasional dengan uji T berpasangan. Populasi penelitian adalah 35 siswa kelas XII TSM. Penelitian ini menggunakan teknik total sampling, di mana seluruh populasi dijadikan sampel penelitian karena jumlahnya yang kurang dari 100. Data diperoleh dari dokumentasi nilai PRAKERIN dan hasil UKK yang diuji oleh penguji eksternal. Hasil menunjukkan pengaruh signifikan antara nilai PRAKERIN dan UKK, dengan Thitung 2,759 lebih besar dari Ttabel 2,032 pada taraf signifikansi 5%. Kesimpulannya, pengalaman PRAKERIN berpengaruh positif terhadap UKK.

References

H. D. Saputra, D. Setiawan, D. Yuvenda, A. Arif, and R. Hidayat, “PENINGKATAN KOMPETENSI SISWA MELALUI PELATIHAN TEKNOLOGI SEPEDA MOTOR,” Sulben, vol. 19, no. 3, p. 127, Oct. 2019, doi: 10.24036/sb.0180.

W. Purwanto, T.-K. Liu, H. Maksum, H. D. Saputra, M. Y. Setiawan, and M. Nasir, “THE FUEL SYSTEM MODIFICATION TO STRENGTHEN ACHIEVEMENT AND THE PROSPECT OF UTILIZING GASOLINE ETHANOL BLENDED WITH WATER INJECTION,” vol. 5, 2024.

M. Elfin, E. Indrawan, R. Lapisa, and M. Mulianti, “Hubungan Pengalaman Praktek Industri Terhadap Minat Berwirausaha Mahasiswa S1 Pendidikan Teknik Mesin Universitas Negeri Padang,” Vokasi Mekanika, vol. 4, no. 2, pp. 25–30, May 2022, doi: 10.24036/vomek.v4i2.329.

T. Sugiarto, M. Giatman, N. Syah, D. S. Putra, N. Hidayat, and A. Baharudin, “Jenis Pekerjaan dan Karir di Bidang Otomotif bagi Lulusan Jurusan Teknik Otomotif,” PAKAR, vol. 22, no. 1, pp. 29–37, Jan. 2024, doi: 10.24036/pakar.v22i1.341.

H. Maksum, T. Sugiarto, N. Hidayat, S. Siman, and H. Hasan, “Development of Learning Modul on the Work Based Learning Learning Model the Teaching Factory Concept (WBL-TEFA) in Automotive Vocational Learning,” PAKAR, vol. 22, no. 1, pp. 18–28, Jan. 2024, doi: 10.24036/pakar.v22i1.422.

H. D. Saputra, F. Ismet, and A. Andrizal, “Pengaruh Motivasi Terhadap Hasil Belajar Siswa SMK,” INVOTEK, vol. 18, no. 1, pp. 25–30, Apr. 2018, doi: 10.24036/invotek.v18i1.168.

E. Diwangkoro and Soenarto, “Development of teaching factory learning models in vocational schools,” J. Phys.: Conf. Ser., vol. 1456, no. 1, p. 012046, Jan. 2020, doi: 10.1088/1742-6596/1456/1/012046.

S. Antera, “Professional Competence of Vocational Teachers: a Conceptual Review,” Vocations and Learning, vol. 14, no. 3, pp. 459–479, Oct. 2021, doi: 10.1007/s12186-021-09271-7.

D. Arinaitwe, “Practices and strategies for enhancing learning through collaboration between vocational teacher training institutions and workplaces,” Empirical Res Voc Ed Train, vol. 13, no. 1, p. 13, Mar. 2021, doi: 10.1186/s40461-021-00117-z.

A. Arif et al., “Pengaruh Peranan Bimbingan dan Konseling Terhadap Kesiapan Kerja Siswa SMK,” vol. 21, no. 2, 2023.

A. D. Rachmawati and Y. S. Kusumah, “Evaluation of industrial work practice program in Vocational High School 1 Rejotangan,” Jurnal Pendidikan Vokasi, vol. 13, no. 1, Art. no. 1, May 2023, doi: 10.21831/jpv.v13i1.46917.

V. P. Vachruddin, B. A. Susanto, A. R. Karim, K. Kusaeri, and A. Aditomo, “Industrial-based competency and expertise assessment: study of management assessments at SMK center of excellence and vocational education and training (vet),” Jurnal Pendidikan Teknologi dan Kejuruan, vol. 29, no. 2, Art. no. 2, Oct. 2023, doi: 10.21831/jptk.v29i2.63801.

E. Rohaeni, S. Trisnamansyah, I. Wasliman, and S. Sauri, “Implementation of Teaching Factory in Improving the Competence of Vocational High School Students (SMK),” Journal of Social Science, vol. 2, no. 5, pp. 598–609, Sep. 2021, doi: 10.46799/jss.v2i5.220.

B. Bunawar, “Strategies for Improving The Quality of Graduates Through Productive,” Aug. 2022. Accessed: Oct. 08, 2024. [Online]. Available: https://eudl.eu/doi/10.4108/eai.28-5-2022.2320433

H. Hasanuddin, A. Yulianto, and W. Widiyanto, “Evaluation of the Industrial Work Practice Implementation Program (Prakerin) Using the CIPP Model (Context, Input, Process, Product) in the Motorcycle Engineering an Business Department at Vocational High School (SMK) Negeri 1 Bangsri Jepara,” Educational Management, vol. 11, no. 2, Art. no. 2, Dec. 2022.

W. Wagino, “Exploring the Full Potential of Collaborative Learning and E-Learning Environments in Universities: A Systematic Review,” vol. 12, no. 3.

A. Asiah, A. Sanusi, H. Hanafiah, and A. Mulyanto, “Implementation of the Partnership for SMKN 1 Cihampelas with the Industrial World (DUDI) to improve the competence of graduates,” International Journal Of Humanities Education and Social Sciences (IJHESS), vol. 1, no. 4, Art. no. 4, 2022, Accessed: Oct. 08, 2024. [Online]. Available: https://doi.org/10.55227/ijhess.v1i4.88

R. Effendi, I. Warsah, and J. Warlizasusi, “Implementasi Manajemen Mutu Lulusan Berbasis Karakter Spiritual Di Era Revolusi Industri 4.0 ( Studi Pada SMK IT AL Husna Lebong,” masters, IAIN Curup, 2022. Accessed: Oct. 08, 2024. [Online]. Available: https://e-theses.iaincurup.ac.id/2493/

D. A. Sudjimat, “Mencetak SDM terampil dan berkarakter melalui implementasi model IPJBL pada pendidikan vokasi di era industri 4.0,” Universitas Negeri Malang, Aug. 2022. Accessed: Oct. 08, 2024. [Online]. Available: https://repository.um.ac.id/2471/

A. Supriyadi, R. D. Rusmawati, and Hartono, “Implementation of Link and Match Program Development through Online Practice Handbook,” Technium Soc. Sci. J., vol. 32, p. 95, 2022.

N. Faturohman and S. Suherman, “The Pattern of Vocational School Partnership with Industry and the World of Work (IDUKA) In Order to Increase the Absorption Of Graduates of Setiabudhi Vocational School Rangkasbitung,” Journal of Positive School Psychology, pp. 5191–5197, Jun. 2022.

L. Z. Hikmah, N. Ulfatin, and J. Juharyanto, “Analyzing of IDUKA as Partner to Improve the Quality of Graduates,” JMKSP (Jurnal Manajemen, Kepemimpinan, dan Supervisi Pendidikan), vol. 9, no. 1, Art. no. 1, Mar. 2024, doi: 10.31851/jmksp.v9i1.14495.

B. Ixtiarto, “Kemitraan Sekolah Menengah Kejuruan Dengan Dunia Usaha dan Dunia Industri (Kajian Aspek Penhgelolaan Pada SMK Muhammadiyah 2 Wuryantoro Kabupaten Wonogiri),” Jurnal Pendidikan Ilmu Sosial, vol. 26, no. 1, Art. no. 1, Aug. 2016, doi: 10.2317/jpis.v26i1.2130.

A. Purwadi, A. Agustina, F. D. Sulistyo, U. T. Rahmadi, and A. Aisha, Pengelolaan pendidikan vokasi yang bermutu pada SMK bidang kepariwisataan. Jakarta: Pusat Penelitian Kebijakan, 2020. Accessed: Oct. 08, 2024. [Online]. Available: https://repositori.kemdikbud.go.id/21562/

U. R. Wahyudin, H. Permana, E. Nurlailasari, and E. Nasrudin, “Development of Educational Quality Management Model Based on Industrial Technology 4.0 at Vocational High School,” Atlantis Press, Oct. 2023, pp. 209–221. doi: 10.2991/978-2-38476-118-0_23.

A. N. Hasan, I. Hanafi, and R. Riyadi, “Evaluation Of The Field Work Practice Program (Pkl) Using The Discrepancy Evaluation Model (Dem) In The Computer Engineering And Informatics Expertise Program At Smk Negeri 7 Bandar Lampung,” Journal of Social Research, vol. 3, no. 6, pp. 1121–1140, Jun. 2024.

T. Suminar, Y. Siswanto, S. Wardani, A. Yusuf, and I. Islahuddin, “Determinant Model of Graduate Competence Partnership-based Life Skills Training in the Industry 4.0 Era,” Journal of Nonformal Education, vol. 10, no. 1, Art. no. 1, Sep. 2024, doi: 10.15294/jone.v10i1.1658.

F. M. Gumay, I. W. Distrik, A. Suyatna, and M. Azizah, “Development of the Link and Match Learning Program through the Application of the Dual-System Method to Support the Industrial Revolution 4.0 in Sinergy with Freedom to Learn,” Jurnal Penelitian Pendidikan IPA, vol. 10, no. 8, Art. no. 8, Aug. 2024, doi: 10.29303/jppipa.v10i8.7337.

A. B. Hidayatullah, P. Thomas, and W. Widiyanto, “Strategy for Increasing Competence of Medical Representatives,” Journal of Economic Education, vol. 9, no. 1, Art. no. 1, Jun. 2020, doi: 10.15294/jeec.v8i2.33086.

N. Pandis, “Why using a paired t test to assess agreement is problematic?,” American Journal of Orthodontics and Dentofacial Orthopedics, vol. 160, no. 5, pp. 767–768, Nov. 2021, doi: 10.1016/j.ajodo.2021.07.001.

K. Lorig, P. L. Ritter, D. D. Laurent, and V. Yank, “Building Better Caregivers: A Pragmatic 12-Month Trial of a Community-Based Workshop for Caregivers of Cognitively Impaired Adults,” J Appl Gerontol, vol. 38, no. 9, pp. 1228–1252, Sep. 2019, doi: 10.1177/0733464817741682.

H. W. Artha, Ilham, E. R. Barokah, N. Jalinus, and Waskito, “Implementasi Pendidikan Di SMK Negeri 3 Kota Solok: Tinjauan Terhadap Penerapan Kurikulum Merdeka, Teaching Factory dan Prakerin,” JTPVI: Jurnal Teknologi dan Pendidikan Vokasi Indonesia, vol. 2, no. 2, Art. no. 2, Mar. 2024, doi: 10.24036/jtpvi.v2i2.160.

Downloads

Published

2024-10-31

How to Cite

Rasid Annafi, W., Sugiarto, T., Arif, A., & Saputra, H. D. (2024). Pengaruh Praktek Kerja Industri (PRAKERIN) Terhadap Hasil Uji Kompetensi Keahlian (UKK) Pada Siswa SMK Negeri 3 Bungo. JTPVI: Jurnal Teknologi Dan Pendidikan Vokasi Indonesia, 3(1), 537–546. https://doi.org/10.24036/jtpvi.v3i1.266

Most read articles by the same author(s)

1 2 3 4 5 > >>